AL Solid Carbide End Mills 2 Flutes

Gambaran

Al seri Solid Carbide End Mills kanggo Aluminium, 2 Flutes, Metric, Flattened

Rekomendasi materi potong: Aluminium, Tembaga, Alas Aluminium, Alas Aluminium, PVC, Kuningan lan Non-Ferrous Logam

Pelapisan: Uncoated, finishing apik, scarp alus mbusak efek

WC: 89.2-90.2

Co: 10/12

HRC: 91-92

Kapadhetan (g / cm3): 14.2-14.5

RTS (N / mm2): ≥ 3500

Ukuran wiji (um): 0,6

Sudhut Helix: 45 °

Sudhut ngarep: 17 °

Busak jelas: Lurus

Kecepatan lan Feed kanggo Penggilingan sisih kanggo Slot Penggilingan nyuda Feed Rate dening 70% Banyu Teleskop Cutting Cairan lan Clockwise sisih Penggilingan disaranake nggunakake overhang paling cendhak bisa.

Aluminium Alloy	Silicon Aluminum Alloy ≤10% Si
RPM 13000 Feed 1250 mm / min	RPM 10600 Feed 1000 mm / menit

Spesifikasi

Tipe	D	d	H	L	Z
AL-2E-D1.0	1	4	3	50	2
AL-2E-D1.5	1.5	4	4	50	2
AL-2E-D2.0	2	4	6	50	2
AL-2E-D2.5	2.5	4	7	50	2
AL-2E-D3.0	3	6	9	50	2
AL-2E-D4.0	4	6	12	50	2
AL-2E-D5.0	5	6	15	50	2
AL-2E-D6.0	6	6	18	60	2
AL-2E-D8.0	8	8	20	60	2
AL-2E-D10.0	10	10	30	75	2
AL-2E-D12.0	12	12	32	75	2
AL-2E-D16.0	16	16	45	100	2
AL-2E-D20.0	20	20	45	100	2

Grade Chart

Seri	Grade	Pelapisan	Bahan Grade
MG	MT250S	PVD	MT08
MP	MT255S	PVD	MT12
Al	MT040S	Ora Ana	MT10

Ulasan

Ora ana review maneh.

Dadi sing pertama kanggo maneh "AL Solid Carbide End mills 2 Flutes"

Sampeyan kudu logged in kanggo ngirim review.

AL Solid Carbide End Mills 2 Flutes

AL Solid Carbide End Mills 2 Flutes

Gambaran