Gambaran
Pabrik Akhir MP 2 Flutes Solid Carbide End
Pabrik Tipe Akhir Carbon Quill Performance High Performance MP Series for General Use, 2 Flutes, Flattened, Metric
Cocog kanggo bahan nganti 58HRC, ngolah kanthi apik ing Cast Iron, Copper, Mold Tool, lan Die Steel
Pelapisan: TiAlN
WC: 89.2-90.2
Co: 10/12
HRC: 91-92
Kapadhetan (g / cm3): 14.2-14.5
RTS (N / mm2): ≥ 3500
Ukuran wiji (um): 0,6
Helix angle: 35 °
Sudhut ngarep: 8 °
Busak jelas: Lurus
Kecepatan lan Feed kanggo Penggilingan sisih Kanggo Slot Penggilingan nyuda angka
| Cast Iron Alloy Steel 30HRC | Stainless Steel | Pre Hardened Quenched lan tempered Steel 40HRC | Pre Hardened Quenched lan tempered Steel 50HRC | Hardened Steel 55HRC |
| RPM 7000 Feed 600 mm / min | RPM 3700 Feed 140 mm / min | RPM 5300 Feed 465 mm / min | RPM 4200 Feed 360 mm / min | RPM 3710 Feed 260 mm / menit |
Spesifikasi:
| Tipe | D | d | H | L | Z |
| MP-2E-D1.0 | 1 | 4 | 3 | 50 | 2 |
| MP-2E-D1.5 | 1.5 | 4 | 4 | 50 | 2 |
| MP-2E-D2.0 | 2 | 4 | 6 | 50 | 2 |
| MP-2E-D2.5 | 2.5 | 4 | 8 | 50 | 2 |
| MP-2E-D3.0 | 3 | 4 | 8 | 50 | 2 |
| MP-2E-D3.5 | 3.5 | 4 | 10 | 50 | 2 |
| MP-2E-D4.0 | 4 | 4 | 11 | 50 | 2 |
| MP-2E-D4.5 | 4.5 | 6 | 11 | 50 | 2 |
| MP-2E-D5.0 | 5 | 6 | 13 | 50 | 2 |
| MP-2E-D5.5 | 5.5 | 6 | 16 | 50 | 2 |
| MP-2E-D6.0 | 6 | 6 | 16 | 50 | 2 |
| MP-2E-D7.0 | 7 | 8 | 20 | 60 | 2 |
| MP-2E-D8.0 | 8 | 8 | 20 | 60 | 2 |
| MP-2E-D9.0 | 9 | 10 | 22 | 75 | 2 |
| MP-2E-D10.0 | 10 | 10 | 25 | 75 | 2 |
| MP-2E-D11.0 | 11 | 12 | 26 | 75 | 2 |
| MP-2E-D12.0 | 12 | 12 | 30 | 75 | 2 |
| MP-2E-D14.0 | 14 | 14 | 32 | 100 | 2 |
| MP-2E-D16.0 | 16 | 16 | 45 | 100 | 2 |
| MP-2E-D18.0 | 18 | 18 | 45 | 100 | 2 |
| MP-2E-D20.0 | 20 | 20 | 45 | 100 | 2 |
Grade Chart
| Seri | Grade | Pelapisan | Bahan Grade |
| MG | MT250S | PVD | MT08 |
| MP | MT255S | PVD | MT12 |
| Al | MT040S | Ora Ana |
Basa Jawa 
English 
简体中文 
Español 
हिन्दी 
العربية 
Português do Brasil 
বাংলা 
Русский 
日本語 
ਪੰਜਾਬੀ 
Deutsch 
한국어 
Français 
Türkçe 
Polski 
Tiếng Việt
Ulasan
Ora ana review maneh.