Description
MP 4 Flutes Radius End mills
MP Series High-Performance Solid Carbide Endmills for General Use, 4 Flutes, Radius, Metric
Suitable for Pain Carbon Steel, Cast Iron, Pre-hardened Quenched and Tempered Steel, Hardened Steel up to 58HRC.
Coating: TiAlN
WC: 89.2-90.2
Co: 10/12
HRC: 91-92
Density (g/cm3): 14.2-14.5
RTS (N/mm2) : ≥ 3500
Grain size (um): 0.6
Helix angle: 35°
Front angle: 8°
Clear edge: Straight
| Alloy Steel, Cast Iron | Stainless Steel | Pre-hardened and Tempered Steel 40HRC | Pre-hardened and Tempered Steel 50HRC | Hardened Steel 55HRC |
| RPM 10800 Feed 1010 mm/min | RPM 5500 Feed 175 mm/min | RPM 8000 Feed 770 mm/min | RPM 6500 Feed 600 mm/min | RPM 5570 Feed 445 mm/min |
Speeds and Feeds for Side Milling for Slot Milling reduce the RPM by 50%-70% and the Feed by 40%-60%
Use air cooling or minimum oil mist cooling
Specification:
| TYPE | D | R | d | H | L | Z |
| MP-4R-D3.0R0.2 | 3 | 0.2 | 4 | 8 | 50 | 4 |
| MP-4R-D4.0R0.3 | 4 | 0.3 | 4 | 10 | 50 | 4 |
| MP-4R-D4.0R0.5 | 4 | 0.5 | 6 | 10 | 50 | 4 |
| MP-4R-D5.0R0.5 | 5 | 0.5 | 6 | 13 | 50 | 4 |
| MP-4R-D5.0R1.0 | 5 | 1 | 6 | 13 | 50 | 4 |
| MP-4R-D6.0R0.5 | 6 | 0.5 | 6 | 16 | 50 | 4 |
| MP-4R-D6.0R1.0 | 6 | 1 | 6 | 16 | 50 | 4 |
| MP-4R-D8.0R0.5 | 8 | 0.5 | 8 | 20 | 60 | 4 |
| MP-4R-D8.0R1.0 | 8 | 1 | 8 | 20 | 60 | 4 |
| MP-4R-D10.0R0.5 | 10 | 0.5 | 10 | 25 | 75 | 4 |
| MP-4R-D10.0R1.0 | 10 | 1 | 10 | 25 | 75 | 4 |
| MP-4R-D10.0R2.0 | 10 | 2 | 10 | 25 | 75 | 4 |
| MP-4R-D10.0R3.0 | 10 | 3 | 10 | 25 | 75 | 4 |
| MP-4R-D12.0R0.5 | 12 | 0.5 | 12 | 30 | 75 | 4 |
| MP-4R-D12.0R1.0 | 12 | 1 | 12 | 30 | 75 | 4 |
| MP-4R-D12.0R2.0 | 12 | 2 | 12 | 30 | 75 | 4 |
| MP-4R-D12.0R3.0 | 12 | 3 | 12 | 30 | 75 | 4 |
Grade Chart
| Series | Grade | Coating | Material Grade |
| MG | MT250S | PVD | MT08 |
| MP | MT255S | PVD | MT12 |
| Al | MT040S | None | MT10 |
English 
简体中文 
Español 
हिन्दी 
العربية 
Português do Brasil 
বাংলা 
Русский 
日本語 
ਪੰਜਾਬੀ 
Basa Jawa 
Deutsch 
한국어 
Français 
Türkçe 
Polski 
Tiếng Việt
Reviews
There are no reviews yet.