AL Solid Carbide End mills 2 Flutes

Al series Solid Carbide End mills for Aluminium, 2 Flutes, Metric,Flattened

Category: Tag: Product ID: 2415

Description

AL Solid Carbide End mills 2 Flutes

Al series Solid Carbide End mills for Aluminium, 2 Flutes, Metric,Flattened

Recommend cut material: Aluminium, Copper, Cast Aluminium, Aluminium alloy, PVC, Brass and other Non-ferrous Metals

 

Coating: Uncoated, good surface finishing, smooth scarp remove effect

WC: 89.2-90.2

Co: 10/12

HRC: 91-92

Density (g/cm3): 14.2-14.5

RTS (N/mm2) : ≥ 3500

Grain size (um): 0.6

Helix angle: 45°

Front angle: 17°

Clear edge: Straight

 

Speeds and Feeds for Side Milling for Slot Milling reduce the Feed Rate by 70% Water Soluble Cutting Fluid and Clockwise Side Milling is recommended using the shortest overhang possible.

Aluminium AlloySilicon Aluminium Alloy ≤10% Si
RPM 13000 Feed 1250 mm/minRPM 10600 Feed 1000 mm/min

Specification

TYPEDdHLZ
AL-2E-D1.0143502
AL-2E-D1.51.544502
AL-2E-D2.0246502
AL-2E-D2.52.547502
AL-2E-D3.0369502
AL-2E-D4.04612502
AL-2E-D5.05615502
AL-2E-D6.06618602
AL-2E-D8.08820602
AL-2E-D10.0101030752
AL-2E-D12.0121232752
AL-2E-D16.01616451002
AL-2E-D20.02020451002

Grade Chart

SeriesGradeCoatingMaterial Grade
MGMT250SPVDMT08
MPMT255SPVDMT12
AlMT040SNoneMT10

Reviews

There are no reviews yet.

Be the first to review “AL Solid Carbide End mills 2 Flutes”
en_USEnglish