SOLID TUNGSTEN CARBIDE RODS

What are tungsten carbide rods?

Solid cemented carbide rods are widely used for high-quality solid carbide tools such as milling cutters, end mills, drills or reamers.

Specialized in tungsten carbide round bars, with an outstanding product line of solid and coolant carbide rod, we manufacture and stock unground and ground carbide rods for you. Our h6 polished chamfered carbide rods are most popular.

Our grade coverage ISO K05 to K40, from machining aluminium, steel, non-ferrous metals, to titanium or we develop grade for your applications. Our 10% cobalt grade MT10 is widely used for machining aluminium and steel or general application. Our 12%cobalt grade MT12 is especially suitable for machining hard material like stainless steel and composite material. All these grades are made from Ultra-fine grain cemented carbide

Unground Tungsten Carbide Rod
Unground Tungsten Carbide Rod
h6 polished Tungsten Carbide Rods
h6 polished Tungsten Carbide Rods

 

 

 

What is ultra-fine cemented carbide?

Ultra-fine grain cemented carbide is a high hardness, high strength and high wear resistance both carbide, and the processing of mutual adsorption – diffusion effect is small, suitable for processing heat-resistant alloy steel, titanium, high High strength non-metallic brittle materials and metal materials such as glass, marble, granite, Plastic reinforced glass fiberboard and other cutting and non-ferrous metals tungsten, molybdenum and other alloy processing.

As the ultra-fine grain cemented carbide with high toughness and strength, high hardness and wear resistance, so as a cutting tool to obtain high-precision edge, allowing the use of large rake angle to ensure sharp blade edge. So that it can withstand a large cutting force, and can get a high finish of the machined surface.

It can improve the precision of the tool and the finish of the machined material by 1 ~ 3, especially in the processing of heat-resistant alloy, titanium alloy, chilled cast iron and other aspects show good cutting performance. Ultra-fine grain carbide cutting tool processing high-strength steel, heat-resistant alloys and stainless steel, life than P01 or K10 alloy more than doubledultrafine grain cemented carbide

Such as Meetyou ultra-fine grain carbide cutting tool processing these materials than ordinary carbide cutting tool life is more than 10 times higher. The development of ultrafine grain cemented carbide has been developed to build the foundation of cemented carbide end mills and carbide twist drills.

Carbide end mills and twist drills are generally made of high strength, high hardness, ultrafine grain cemented carbide to ensure the cutting performance of the center edge. Carbide end mills are widely used in the mold industry (especially plastic mold industry), the automotive industry, IT and related industries. The plastic industry has a large number of pre-hardened HRC30-34 plastic mold steel as raw materials, in which the hardness of its machinability is poor, only the use of carbide end mills high-efficiency processing of good surface roughness of high precision mode Cavity.

At present, carbide end mills have been used in automobile production lines, IT and related industries extensive use of Ф0.1 ~ 8mm overall carbide end mill processing glass fiber reinforced printed circuit board around and micro-processing.

Solid Carbide Twist Drill is rapidly evolving to meet the high efficiency of the automotive industry and the processing of plastic reinforced glass fiber boards (PCBs) in the IT industry. Drilling on the PCB, the hole of the hole without glass fiber hair, high-speed steel twist drill cannot meet the requirements, and must use the overall carbide twist drill. With the rapid development of electronics, information and other industries, the demand for carbide twist drill will be growing.

en_USEnglish