Description
Carbide Brazed Turning Inserts For Cutting Tool
- 100% virgin raw material to produce tungsten carbide products.
- Hip sintered, high hardness, high wear resistance
- OEM Customizable
- Various sizes and full types available in stock
- ISO 9001 Certificated
Item Code |
L |
t |
s |
R |
rε |
e |
α0 |
α10 |
A406 |
6 | 5 | 2.5 | 5 | 0.5 | 0 | 0 | |
A408 |
8 | 6 | 3 | 6 | 0.5 | 0 | 0 | |
A410 |
10 | 6 | 3.5 | 6 | 1 | 14 | 8 | |
A412 |
12 | 8 | 4.5 | 8 | 1 | 0.8 | 14 | 8 |
A416 |
16 | 10 | 5.5 | 10 | 1 | 0.8 | 14 | 8 |
A420 |
20 | 12 | 7 | 12.5 | 1 | 0.8 | 14 | 8 |
A425 |
25 | 15 | 8.5 | 16 | 1 | 0.8 | 14 | 8 |
A430 |
30 | 16 | 6 | 16 | 1 | 0.8 | 14 | 8 |
A430A |
30 | 16 | 9.5 | 16 | 1 | 0.8 | 14 | 8 |
A440 |
40 | 18 | 8 | 18 | 1 | 0.8 | 14 | 8 |
A440A |
40 | 18 | 10.5 | 18 | 1 | 1.2 | 14 | 8 |
A450 |
50 | 20 | 8 | 20 | 1.5 | 0.8 | 14 | 8 |
A450A |
50 | 20 | 12 | 20 | 1.5 | 1.2 | 14 | 8 |
A410Z |
10 | 6 | 3.5 | 6 | 1 | 14 | 8 | |
A412Z |
12 | 8 | 4.5 | 8 | 1 | 0.8 | 14 | 8 |
A416Z |
16 | 10 | 5.5 | 10 | 1 | 0.8 | 14 | 8 |
A420Z |
20 | 12 | 7 | 12.5 | 1 | 0.8 | 14 | 8 |
A425Z |
25 | 15 | 8.5 | 16 | 1 | 0.8 | 14 | 8 |
A430Z |
30 | 16 | 6 | 16 | 1 | 0.8 | 14 | 8 |
A430AZ |
30 | 16 | 9.5 | 16 | 1 | 0.8 | 14 | 8 |
A440Z |
40 | 18 | 8 | 18 | 1 | 0.8 | 14 | 8 |
A440AZ |
40 | 18 | 10.5 | 18 | 1 | 1.2 | 14 | 8 |
A450Z |
50 | 20 | 8 | 20 | 1.5 | 0.8 | 14 | 8 |
A450AZ |
50 | 20 | 12 | 20 | 1.5 | 1.2 | 14 | 8 |
These carbide brazed tips can be made with various grades for different applications. We can also make as per your special requirements.
Grade |
ISO Code |
Density |
Hardness |
T.R.S |
Applications recommended |
YG3 |
K05 |
15.10 |
92.0 |
1400 |
Suitable for finishing of cast iron and nonferrous metal. |
YG6X |
K10 |
14.95 |
92.5 |
2200 |
The finishing & semi-finishing of cast iron and nonferrous metals and also for the machining of manganese steel and hardening steel. |
YG6 |
K15 |
14.95 |
91.5 |
2400 |
Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel. |
YG8 |
K20 |
14.80 |
90.0 |
2900 |
|
YW1 |
M10 |
13.30 |
92.5 |
2100 |
Suitable for finishing and semi-finishing of stainless steel and conventional alloy steel. |
YW2 |
M20 |
13.10 |
92 |
2400 |
The grade can be used for the semi-finishing of stainless steel and low-alloy steel and it is mainly used for the machining of railway wheel hubs. |
YT15 |
P10 |
11.4 |
92.0 |
2100 |
Suitable for the finishing and semi-finishing for steel and cast steel with a moderate feed rate and rather high cutting speed. |
YT14 |
P20 |
11.6 |
91.5 |
2100 |
Suitable for the finishing and semi-finishing of steel and cast steel. |
YT5 |
P30 |
13.0 |
90.5 |
2400 |
Suitable for the heavy duty rough turning of and cast steel with a big feed rate at a medium and low speed under unfavorable working conditions. |
Reviews
There are no reviews yet.