Al series Solid Carbide End mills for Aluminium, 2 Flutes, Ball Nose, Metric

Recommend cut material: Aluminium, Non-ferrous Metals and Plastics

Coating: Uncoated, good surface finishing, smooth scarp remove effect

WC: 89.2-90.2

Co: 10/12

HRC: 91-92

Density (g/cm3): 14.2-14.5

RTS (N/mm2) : ≥ 3500

Grain size (um): 0.6

Helix angle: 45°

Front angle: 17°

Clear edge: Straight

Speeds and Feeds for Side Milling for Slot Milling reduce the Feed Rate by 70% Water Soluble Cutting Fluid and Clockwise Side Milling is recommended using the shortest overhang possible.