If you ask, “What’s the difference between CNC machining and 3D printing?” The most straightforward answer: 3D printing is an augmentation technology, CNC machining is a reduction technology. 1. Material differences The main materials for 3D printing are liquid resin…
Deep-hole drills are often divided into external chip removal (also known as gun drill), internal chip removal (often abbreviated as BTA by the International Association of Deep-hole Drilling), nesting or spraying chip removal. This paper mainly introduces the development and…
The application of machine tool clamping system is conducive to ensuring the accuracy of workpiece processing and stabilizing product quality, improving labor productivity and reducing costs, improving workers’working conditions and ensuring product safety, expanding the scope of machine tool technology, and…
Most machinists are familiar with the four processing methods, but did you know the concrete differences between them? When the correct selection of them is done, A fast and highly accurate operation for your project will advantageously conduce to your productivity and…
After a long period of development in 1860, cutting fluid began to be widely used in vehicle, planer, grinding, gear processing and thread processing. With the development of cutting fluid, vegetable oil, edible oil, water and so on are gradually…
Như trong Hình 1. Thông thường, việc sử dụng vật liệu mài mòn để xử lý được gọi là máy mài. Các dụng cụ mài thường được sử dụng là các dụng cụ mài hợp nhất (như đá mài, đá dầu, v.v.) và các dụng cụ mài tráng (như đai mài, v.v.).
The proper selection of cutting insert geometry is the up-most important factors during effective cutting. So pay attention, we are going to share you the most straightforward insight about cutting insert geometry, tool signatures based on a mold of the…
Wood drill bits are the main topic of this article. Plus, we will share some useful tips for efficiently drilling out satisfactory holes in wood. Before you put up a cabinet or shelf, we genuinely hope these tooltips herein we…
In mechanic engineering, machining tolerance refers to the amount of unplanned deviation between the nominal dimension and real dimension. All kinds of tolerances are affected by the presence of various reasons such as position error, incorrect relative rotation between workpiece…
Shown as the figure below, corner radius is formed by crossed line major cutting edge and side cutting edge, which is also named as edge radius. In the cutting process, in order to improve the tool tip strength and reduce…
Cắt nước, còn được gọi là dao phun nước, được gọi là một loại công nghệ cắt tia nước áp lực cao, đó là máy cắt nước áp lực cao. Dưới sự điều khiển của máy tính, phôi có thể được chạm khắc tùy ý và ít bị ảnh hưởng bởi chất lượng vật liệu được xử lý.
Hôm nay bạn sẽ có một ý tưởng sơ bộ về định nghĩa knurling và knurling. Định nghĩa có khía là một quá trình để cuộn các mẫu hình thẳng, hình thoi hoặc hình cầu thành mảnh công việc, có thể được thực hiện trên các công cụ thao tác hoặc máy tiện. Các…
Khi các dải băng liên tục được sản xuất trong quá trình xử lý, nó không chỉ dễ làm trầy xước bề mặt phôi và làm hỏng lưỡi mà còn đe dọa đến sự an toàn của người vận hành. Do đó, điều rất quan trọng là phải có công nghệ cần thiết
Chất lỏng cắt (chất làm mát) là một loại chất lỏng công nghiệp được sử dụng trong quá trình cắt và mài kim loại để làm mát và bôi trơn các dụng cụ cắt và phôi. Chất lỏng cắt bao gồm nhiều loại phụ gia siêu chức năng, được kết hợp một cách khoa học. Nó
Mũi khoan xoắn và mũi khoan lỗ sâu luôn là lựa chọn phổ biến trong ngành chế biến lỗ sâu. Chúng ta có thể làm cho hai công cụ này xử lý thép q235, thép # 45 và nhôm thường được sử dụng để khám phá sự khác biệt của Lát